Pneumatic Hydraulic Pressure Regulator HG-961635

Model: HG-961635
Used to adjust low to high viscosity sealants or adhesives
Control downstream pressure
Suppress flow surges
Glue regulator is an ideal choice for low to high viscosity sealants or adhesives
These regulators control the downstream pressure of the adhesive liquid or semi-solid material. In a multi outlet system, install a regulator before each spray glue gun or extrusion glue gun. The regulator precisely controls the pressure of each glue gun through a universal control system. When the pipeline valve is opened and during the pump stroke transition, it can also suppress flow surges.

Specifications

Model	Adjustable power source	Rated maximum inlet pressure	Pressure adjustment range
HG-961635	Compressed air	5000psi (34.4MPa; 344bar)	250-4500psi (1.7-31MPa; 17-310bar)

	HG-961635 Basic Model	HG-961635EH Heating Module	HG-961635 HG-961635EH Basic Model + Heating Module	Remark
Fluid interface specifications	3/4npt(f)	——	3/4npt(f)
Rated flow	16lpm	————	16lpm	15Pa.s fluid, reference example: coating UBC glue
Rated heating	——	220VAC 100W	220VAC 100W
Applicable viscosity	Suggestion ≤1000Pa.s
Applicable temperature	10-80℃
Weight	7.9kg	0.7kg	8.6kg
Wet area material	PTFE; CS; SST; Tungsten Cobalt Alloy
Installation direction	All