3D Rotating Spray Gun G3W10C

  • Can be carried out within the gun circulation 
  • This 3D rotary gun G3W10C can be used for in-gun circulation to improve efficiency. 
  • Long service life
  • The 3D rotary gun G3W10C is optimized according to the actual application, so that the performance and quality of the product are greatly improved, the service life is prolonged, and the production cost of the user is reduced. 
  • Low maintenance costs 
  • The 3D rotary gun G3W10C does not need to be frequently maintained in the actual use process, and the maintenance cost is lower and more comprehensive. 
  • Support partial custom extensions 
  • This glue gun adopts a partial modular design, which can support external expansion customization and achieve more functions.

G3W10C
G3W10C
Specification Description Related Products Contact Us

Specifications

Main Parameters

ModelGun internal circulationPaint categoryRated air pressure (MPa)Common fluid pressure (MPa)Rated maximum fluid pressureRecommended fluid viscosity (Pa*s)Spindle rotation torque (N*m)Remarks
G3W100NO10.4~1.0≤152112011-12
G3W10CYES10.4~1.0≤152112011-12Circulation in the gun; circulation to the valve needle and valve seat
G3W200NO20.4~1.0≤152112011-12
RemarksUBC glue (viscosity is about 50Pa*s) pressure 12MPa, measured

Other Parameters

ItemG3W100G3W10CG3W200Remarks
Paint interface3/8nptSize φ10 opening; plate opening Rc1/8
Air source interface specificationsD10-Rc1/8Standard male & female connectors;
Wire length 1.5M; 5 cores (3 valves, 1 ground)
Electrical connectionM12-MO5
Applicable temperature20~70℃C
Temperature6.1kg
WeightFKM; PTFE; UPE; SST; Brass; Chrome-manganese steel, Tungsten steel, AL7075
Wet area materialAny
Control voltage24V DCPower outage related status

Description

  • Maximum pressure: 21MPa
  • Fluid viscosity: 120Pa*s
  • Rotation torque: 11-12N*M
  • The 3D rotary glue gun G3W100 for high viscosity materials is usually used in the spraying glue system of the assembly workshop of the automobile factory. It can realize autonomous rotary spraying, reduce manual intervention and improve the production efficiency of the workshop. 
  • In terms of product maintenance, compared with the same type of products, the number of maintenance is less, and the maintenance cost is low, which ensures high efficiency and reduces the maintenance cost of users. 
  • In the process of design, taking into account the diversity of product performance, we added an extended customization module, which can be customized according to the actual use requirements of users.

Product Advantages

01

Stable dispensing, high flow rate, and fast firing response speed.

02

Can replace imported brand Suke SCA with the same glue gun

03

Low maintenance cost, basically no need for maintenance within two years

04

Can be used for gluing and dispensing

Application Cases

Quantitative dispensing of 3D glue gun

Replace the nozzle of the glue gun, use only one nozzle, and apply glue by switching the valve at a certain frequency

3D glue gun spraying effect

During the actual application process, the glue gun sprays evenly and stably, and the gun is turned off and on quickly.

Application Video

Related Products